With the rise of terminal-native AI tools like Claude Code and Cursor Agent, the terminal is no longer just a place to type commands — it’s now the primary development environment. A fast, lightweight, controllable terminal emulator matters more than ever.
Why I Left Warp
Warp is a modern terminal built in Rust, with AI assistance, block editing, and command search as its headline features. I used it for about a year and genuinely enjoyed the convenience, but as time went on, a few issues surfaced:
- Heavy resource usage: GPU rendering plus a rich feature set adds up to noticeable memory and CPU overhead

- Slow startup: a 2–3 second cold start that breaks my flow
- Mandatory login: you can’t use it without an account. Why does a terminal need an account?
- Bundled AI I never used: in practice I lean on Claude Code, so Warp’s built-in AI sat untouched
- Closed source: no way to customize it or contribute back
Why Ghostty
Ghostty is written in Zig by Mitchell Hashimoto, co-founder of HashiCorp. Its design philosophy happens to address every complaint I had about Warp:
- Instant startup: GPU-accelerated rendering, ready in what feels like no time
- Light on resources: roughly a third of Warp’s memory footprint

- Fully open source: MIT licensed, with an active community
- No account needed: works out of the box
- Native feel: follows macOS design conventions
- Simple configuration: one file, intuitive syntax
Installation
brew install --cask ghosttyYou can also download it directly from the official site.
Configuration
Ghostty uses a single config file at ~/.config/ghostty/config:
mkdir -p ~/.config/ghostty && touch ~/.config/ghostty/config
# Install the font used belowbrew install --cask font-maple-mono-nf-cnHere’s my full config:
# ========== Font ==========# Main font: Maple Mono NF CNfont-family = Maple Mono NF CNfont-size = 14# Line height (Maple Font officially recommends 1.8x; 30% worked best for me)adjust-cell-height = 25%# Enable Maple Mono ligatures and font features (the officially recommended set)# calt: basic ligatures | zero: dotted zero | cv01: tighter spacing# ss01: separated equals | ss02: separated comparison operators | ss07: forced >> ligature | ss08: double arrowsfont-feature = calt, cv01, cv03, ss01, ss02, ss03# Font weight (renders bolder, similar to Tabby's 600/700 setup)font-thicken = true
# ========== Theme ==========theme = GitHub Dark Dimmed
# ========== Window size ==========# Initial window size, in character cellswindow-width = 125window-height = 35# Remember window position and sizewindow-save-state = always
# ========== Cursor ==========# Cursor style: block (a thick block cursor, similar to Tabby)cursor-style = bar# Cursor blinkcursor-style-blink = true# Cursor color (bright orange, easier to spot)cursor-color = #ff9e64# Text color under the cursorcursor-text = #1a1b26
# ========== Window appearance ==========# Window paddingwindow-padding-x = 8window-padding-y = 8# Window decoration style (macOS) — the tabs style enables the tab barmacos-titlebar-style = tabs# Keep the window shadowmacos-window-shadow = true
# ========== Other tweaks ==========# Slightly transparent background (optional; 1.0 is fully opaque)background-opacity = 0.97# Scrollback buffer size in bytes# Plenty of room for long-running sessions like Claude Codescrollback-limit = 200000000# Hide the mouse while typingmouse-hide-while-typing = true
# ========== Shell Integration ==========# Enable shell integration, but explicitly disable the cursor feature so it doesn't override our cursor settingsshell-integration = zshshell-integration-features = no-cursor,titlekeybind = shift+enter=text:\x1b\rkeybind = ctrl+enter=text:\\\rThemes
Ghostty ships with a large theme collection:
ghostty +list-themestheme = tokyonighttheme = catppuccin-mochatheme = draculatheme = nordtheme = GitHub Dark Dimmed # the one I useCustom themes live in ~/.config/ghostty/themes/.
Migration Adjustments
Warp works out of the box; Ghostty expects you to configure it yourself. The flip side is far more control.
Command-Line Enhancements
Warp bundles history autosuggestions and syntax highlighting. In Ghostty, you get those from zsh plugins:
brew install zsh-autosuggestions zsh-syntax-highlighting zsh-completionsAdd the following to ~/.zshrc:
# -----------------------# Homebrew Zsh completions (must be BEFORE oh-my-zsh / compinit)# -----------------------if type brew &>/dev/null; then export BREW_PREFIX="$(brew --prefix)" FPATH="$BREW_PREFIX/share/zsh-completions:$FPATH" FPATH="$BREW_PREFIX/share/zsh/site-functions:$FPATH"fi
# -----------------------# Zsh plugins (Homebrew)# -----------------------
# zsh-autosuggestions - suggests commands from history (gray hint text)if [[ -n "$BREW_PREFIX" && -f "$BREW_PREFIX/share/zsh-autosuggestions/zsh-autosuggestions.zsh" ]]; then source "$BREW_PREFIX/share/zsh-autosuggestions/zsh-autosuggestions.zsh"fi
# zsh-syntax-highlighting - command syntax highlighting (must be sourced last)if [[ -n "$BREW_PREFIX" && -f "$BREW_PREFIX/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh" ]]; then source "$BREW_PREFIX/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh"fiNOTEIf you use Oh My Zsh, do not add
zsh-autosuggestionsandzsh-syntax-highlightingtoplugins=()— they would be double-loaded alongside the Homebrew versions.
What each plugin gives you:
- zsh-autosuggestions: suggestions from history (accept with
→) - zsh-syntax-highlighting: syntax highlighting; bad commands turn red
- zsh-completions: enhanced Tab completion
Prompt Theme: Spaceship
Warp ships a polished prompt. In Ghostty you can get a similar look with Spaceship.
1. Install Oh My Zsh (prerequisite)
Spaceship rides on the Oh My Zsh framework, so install that first:
sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"WARNINGThe installer backs up your existing
~/.zshrcto~/.zshrc.pre-oh-my-zshand generates a fresh one. Afterwards, migrate your old settings into the new file by hand.
2. Install the Spaceship theme
git clone https://github.com/spaceship-prompt/spaceship-prompt.git \ "${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/spaceship-prompt" --depth=1
# Create the symlinkln -sf \ "${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/spaceship-prompt/spaceship.zsh-theme" \ "${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/spaceship.zsh-theme"3. Enable the theme
Oh My Zsh generates ~/.zshrc for you; find the ZSH_THEME line and change it to:
export ZSH="$HOME/.oh-my-zsh"ZSH_THEME="spaceship"source "$ZSH/oh-my-zsh.sh"Spaceship shows your Git branch, Node version, command duration, and other context — very handy for day-to-day development.
History Search: Atuin
Warp’s history popup is convenient; Atuin is an even more powerful replacement:
brew install atuin
# Initialize (add to ~/.zshrc)eval "$(atuin init zsh)"
# Import existing shell historyatuin import autoAtuin’s config lives at ~/.config/atuin/config.toml; here’s mine:
# Scope for the ↑ key: global (all directories/sessions/hosts)filter_mode_shell_up_key_binding = "global"
# Search mode for the ↑ key: prefix matching (nice for ssh, git, and the like)search_mode_shell_up_key_binding = "prefix"
# Compact stylestyle = "compact"
# Inline height in rowsinline_height = 14
# Disable the long-command previewshow_preview = false
# Hide the help line and tabs for a cleaner UIshow_help = falseshow_tabs = false
# Enter runs the command immediately (Tab to edit)enter_accept = true
[sync]# Enable sync v2records = trueTIPOnce configured, pressing
↑opens the history list; type a keyword to filter instantly.
Where Atuin shines:
- Full-text search:
Ctrl+Ropens an interactive search - Cross-device sync: optional cloud sync
- Usage stats: see which commands you run most
- Context-aware: filter by directory or session

Comparison
| Aspect | Warp | Ghostty |
|---|---|---|
| Startup speed | 2–3 s | < 0.5 s |
| Memory usage | ~600 MB | ~100 MB |
| Open source | ❌ | ✅ |
| Requires account | ✅ | ❌ |
| Built-in AI | ✅ | ❌ |
| Block editing | ✅ | ❌ |
| Customizability | Medium | High |
Keyboard Shortcuts
| Action | Shortcut |
|---|---|
| Split horizontally | Cmd+D |
| Split vertically | Cmd+Shift+D |
| Switch panes | Cmd+[ / Cmd+] |
| Close pane | Cmd+W |
| Open config | Cmd+Shift+, |
TIPGhostty reloads the config automatically whenever the file changes — no restart needed.
Conclusion
Warp is a car with autopilot; Ghostty is a stick shift.
More effort, but I finally know exactly who’s responsible for every action.